Actual Problems in Machine Building 2017 Vol. 4 No. 1

Actual Problems in Machine Building. Vol. 4. N 1. 2017 Technological Equipment, Machining Attachments and Instruments ____________________________________________________________________ 74 THE SOFTWARE FOR FORMATION OF THE DATABASE OF THE COMBINED TURNING TOOL Lobanov D. V., D.Sc. (Engineering), Professor, e-mail: mf_nauka@brstu.ru Rychkov D. A., Ph.D. (Engineering), Associate Professor, e-mail: dielektrik84@mail.ru Sidorenko S. A., Master’s Degree student, e-mail: serzh_sidorenko_1993@mail.ru Bratsk State University, 40 Makarenko st., Bratsk, 665709, Russian Federation Abstract Ways of increase in efficiency of application of composites which offer to replace the standard constructional and other materials in the field of mechanical engineering are given where it is possible; methods of processing of products from composites among which mechanical it is taken for the most rational are considered; the possibility of creation of products from composite materials with use of the cutting tool is noted; the features of machining of products from composite materials including specifics of cutting are described; the prospects of use of the combined cutting tool with replaceable many-sided plates for processing of composite materials are noted; the solution of the problem of the choice of composite material for a product and the tool for processing of a composite is presented; the software product for formation of the database of the combined turning tool is presented; the prospects of further realization of results of researches are given. Keywords composite materials; the cutting tool; machining; production preparation; efficiency; rational choice