Obrabotka Metallov. 2017 no. 2(75)

ОБРАБОТКА МЕТАЛЛОВ № 2 (75) 2017 77 МАТЕРИАЛОВЕДЕНИЕ the influence of cyclic compressive stresses and to develop recommendations for the usage of steels with various impurities for the impact machines parts manufacture. The effect of nonmetallic inclusions under dynamic loading conditions was evaluated in several stages. At the initial stage, using the methods of metallographic and microspectral analysis, the size, shape and morphology of nonmetallic inclusions in ten melt of 45 steel were determined. The obtained results were used as input data for the software package ANSYS Workbench 15.0 for calculating the stress field intensity the near inclusions. The reliability of the obtained mathematical models was checked by measuring the internal stresses by the X-ray diffraction analysis with ARL X’TRA diffractometer. Metallographic studies have shown that the main types of inclusions in the steel are point oxides, whose size can reach up to 100 microns and plastic sulphides up to 1.mm in length. The results of numerical simulation show that under dynamic compression conditions an application of the approach in which the inclusion is assumed to be mechanically equivalent to the pore or crack is incorrect. Under the dynamic compression condition near the pores and low-strength inclusions in the base material regions with a high level of local stresses are formed. The maximum value of the equivalent stresses was revealed near the elongated defects in the case of their orientation perpendicular to the action of the external force. Stress distribution near hard and strong oxides inclusions is significantly different. The maximum stresses are localized in the inclusion, while the stress magnitude is insignificant in the boundary region between the inclusion and base material. To verify the reliability of the data of the numerical experiment, XRD analysis was used for zonal stresses measuring. The results of X-ray diffractometry confirm the assumption that under compression conditions the presence of pores in the steel and plastic low-strength inclusions leads to a 50 % increase of local stresses of the main material near the defects. The stress level near the solid high-strength inclusions in the base material is 20 % lower than the average level. The results of the research show that it is desirable to make the details of impact machines using the steels whose structure contains inclusions which hardness exceeds the hardness of the matrix or apply high-purity steels with a low content of nonmetallic inclusions. Keywords steel, impact machines, dynamic compression, nonmetallic inclusions, X-ray diffraction. DOI: 10.17212/1994-6309-2017-2-67–78 References 1. Repin А.А., Smolyanitsky B.N., Alekseev S.E., Popelyukh A.I., Timonin V.V., Karpov V.N. Downhole high- pressure air hammers for open pit mining. Journal of Mining Science , 2014, vol. 50, no. 5, pp. 929–937. doi: 10.1134/ S1062739114050123. 2. Murakami Y., Nomoto T., Ueda T. Factors influencing the mechanism of super long fatigue failure in steels. Fa- tigue and Fracture of Engineering Materials and Structures , 1999, vol. 22, iss. 7, pp. 581–590. doi: 10.1046/j.1460- 2695.1999.00187.x. 3. Bergengren Y., Larsson M., Melander A. The influence of machining defects and inclusions on the fatigue properties of a hardened spring steel. Fatigue and Fracture of Engineering Materials and Structures , 1995, vol. 18, iss. 10, pp. 1071–1087. doi: 10.1111/j.1460-2695.1995.tb00840.x. 4. Zhang J.M., Zhang J.F., Yang Z.G., Li G.Y., Yao G., Li S.X., Hui W.J.,Weng Y.Q. Estimation of maximum in- clusion size and fatigue strength in high-strength ADF1 steel. Materials Science and Engineering: A , 2005, vol. 394, iss. 1–2, pp. 126–131. doi: 10.1016/j.msea.2004.11.015. 5. Repin А.A., Alekseev S.E., Popelyukh A.I., Teplykh A.M. Influence of nonmetallic inclusions on endurance of percussivemachines. Journal ofMiningScience , 2011, vol. 47, iss. 6, pp. 798–806. doi: 10.1134/S1062739147060128. 6. Plokhov A.V., Popelyukh A.I., Veselov S.V., Tyurin A.G., Nikulina A.A. Issledovanie konstruktivnoi prochnos- ti materialov posle kombinirovannogo uprochneniya i spetsial’nykh vidov svarki [Research into structural strength of materials after combined hardening and special kinds of welding]. Novosibirsk, NSTU Publ., 2015. 392 р. ISBN 978-5-7782-2635-7. 7. Zhang J.M., Li S.X., Yang Z.G., Li G.Y., Hui W.J., Weng Y.Q. Influence of inclusion size on fatigue behav- ior of high strength steels in the gigacycle fatigue regime. International Journal of Fatigue, 2007, vol. 29, iss. 4, pp. 765–771. doi: 10.1016/j.ijfatigue.2006.06.004. 8. Dominguez G.M.A. Prediction of very high cycle fatigue failure for high strength steels based on the in- clusion geometrical properties. Mechanics of Materials , 2008, vol. 40, iss. 8, pp. 636–640. doi: 10.1016/j.mech- mat.2008.03.001. 9. Yang Z.G., Zhang J.M., Li S.X., Li G.Y., Wang Q.Y., Hui W.J., Weng Y.Q. On the critical inclusion size of high strength steels under ultra-high cycle fatigue. Materials Science and Engineering: A, 2006, vol. 427, iss. 1–2, pp. 167–174. doi: 10.1016/j.msea.2006.04.068.

RkJQdWJsaXNoZXIy MTk0ODM1