Actual Problems in Machine Building 2018 Vol. 5 No. 1-2

Актуальные проблемы в машиностроении. Том 5. № 1-2. 2018 Технологическое оборудование, оснастка и инструменты ____________________________________________________________________ 77 INDUCTION HARDENING KINEMATIC FEATURES OF INTEGRATED PROCESSING Cha G.O. 1, 2 , Ph.D. student, e-mail: Grigoriy_olegovich@mail.ru Skeeba V. Yu. 1 , Ph.D. (Engineering), Associate Professor, e-mail: skeeba_vadim@mail.ru 1 Novosibirsk State Technical University, 20 Prospekt K. Marksa, Novosibirsk, 630073, Russian Federation 2 Technological Design Institute of Scientific Instrument Engineering Siberian Branch RAS, 41 Russkaya str., Novosibirsk, 630058, Russian Federation Abstract This article investigates different schemes for the tool-part positioning and movement of integrated processing on hybrid equipment at the operation of surface hardening of rotating steel parts. Different schemes of surface hardening by high-energy heating with high-frequency currents were analyzed. A selection method of the scheme depending on the workpieces design features, the requirements to surface layer, the operating conditions and production seriality was developed. Keywords hybrid equipment, high-energy heating, high-frequency currents, kinematic analysis Funding The results were obtained under the state task of the Ministry of Education and Science of Russia, project code: 9.11829.2018/11.12.