Actual Problems in Machine Building 2018 Vol. 5 No. 3-4

Actual Problems in Machine Building. Vol. 5. N 3-4. 2018 Innovative Technologies in Mechanical Engineering ____________________________________________________________________ 44 научно-практической конференции, 28–30 сентября 2017 г. – Новосибирск, 2017. – С. 219– 225. 2. Анализ особенностей высокоскоростного точения фрезерованием / А.М. Марков, Ю.В. Федоров, И.С. Потапов, М.В. Андреев, А.А. Шитюк // Актуальные проблемы в машиностроении. – 2017. – Т. 4, № 3. – С. 39–44. 3. Исследование силы резания при высокоскоростном фрезеровании композиционных материалов / А.М. Марков, П.О. Черданцев, С.В. Гайст, А.О. Черданцев, Е.Ю. Лапенков, И.С. Потапов // Актуальные проблемы в машиностроении. – 2017. – Т. 4, № 4. – С. 45–51. 4. Technological support of critical parts for railway transport working properties / A.V. Gabets, D.A. Gabets, A.M. Markov, M.V. Radchenko, S.L. Leonov // IOP Conference Series: Earth and Environmental Science. – 2017. – Vol. 50 (1). – P. 012052. 5. Forecasting of machined surface waviness on the basis of self-oscillations analysis / E.B. Belov, S.L. Leonov, A.M. Markov, A.A. Sitnikov, V.A. Khomenko // IOP Conference Series: Earth and Environmental Science. – 2017. – Vol. 50 (1). – P. 012053. 6. Generalized mathematical model predicting the mechanical processing topography / S.L. Leonov, A.M. Markov, A.B. Belov, N. Sczygol // IOP Conference Series: Materials Science and Engineering. – 2016. – Vol. 126 (1). – P. 012009. ANALYSIS OF MACHINING REGIMES AND THEIR INFLUENCE ON SURFACE ROUGHNESS WHILE HIGH-SPEED TURN-MILLING Markov A.M. , D.Sc. (Engineering), Professor, e-mail: andmarkov@inbox.ru Andreev M.V. , Master’s Degree student, e-mail: m194@mail.ru Shituk A.A. , Ph.D. student, e-mail: shityuk-aa@apzrotor.ru I.I. Polzunov Altai State Technical University, 46 Lenina avenue, Barnaul, Altai region, 656038, Russian Federation Abstract Carried out analysis of high-speed turn-milling regimes. Proved possibility of realization high- speed turn-milling on turning equipment by its equipping with high-speed milling heads. Shown that achieving speeds typical for high-speed machining is possibility by varying the diameter of the milling tool in the range of the standard milling tools dimensions and the rotational speed. Proposed technique for selecting the machining regimes and tool diameter, taking into account the workpiece diameter to ensure a given uniform roughness. Keywords machining, high-speed cutting, turning, milling, cutting parameters.