Actual Problems in Machine Building 2019 Vol. 6 No. 1-4

Actual Problems in Machine Building. Vol. 6. N 1-4. 2019 Technological Equipment, Machining Attachments and Instruments ____________________________________________________________________ 154 TECHNIQUE FOR JUSTIFYING THE TECHNICAL CHARACTERISTICS OF INTEGRATED EQUIPMENT Ivancivsky V. V., D.Sc. (Engineering), Associate Professor, e-mail: ivancivskij@corp.nstu.ru Skeeba V. Yu., Ph.D (Engineering), Associate Professor, e-mail: skeeba_vadim@mail.ru Titova K. A. , Post-graduate Student, e-mail: krispars@yandex.ru Novosibirsk State Technical University, 20 Prospekt K. Marksa, Novosibirsk, 630073, Russian Federation Abstract The purpose of this work is to justify the technical characteristics due to the mathematical description of the work of the integrated process equipment. The method is very important, since it becomes possible to use an automated approach to design, starting with the first stages, and this is precisely what the manufacture of high-quality manufacturing equipment can meet to meet the requirements. This method can be used in the design of any metal-cutting equipment. The advantage of this system is the approximation of the obtained probabilities of processing, to the most rational, to ensure such working conditions of the equipment under which the load on the metal-cutting machine will be maximum, which can be economically justified. Keywords metalworking equipment, complexing, hybrid equipment, technical characteristics. Funding The results were obtained under the state task of the Ministry of Science and Higher Education of the Russian Federation, project code: 9.11829.2018/11.12.