Obrabotka Metallov 2019 Vol. 21 No. 4
OBRABOTKAMETALLOV Vol. 21 No. 4 2019 46 EQUIPMENT. INSTRUMENTS 45. Zakovorotny V.L., Gvindzhiliya V.E. Influence of spindle wobble in a lathe on the tool’s deformational- displacement trajectory. Russian Engineering Research , 2018, vol. 38, no. 8, pp. 623–631. DOI: 10.3103/ S1068798X1808018X. 46. Zakovorotny V.L., Gvindzhiliya V.E. Dynamic influence of spindle wobble in a lathe on the workpiece geometry. Russian Engineering Research , 2018, vol. 38, no. 9, pp. 723–725. DOI: 10.3103/S1068798X18090307. 47. Khamel S., Ouelaa N., Bouacha K. Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool. Journal of Mechanical Sciences and Technology , 2012, vol. 26 (11), pp. 3605–3616. DOI: 10.1007/s12206-012-0853-1. 48. Zakovorotny V.L., LukyanovA.D. The problems of control of the evolution of the dynamic system interacting with the medium. International Journal of Mechanical Engineering and Automation , 2014, vol. 1, no. 5, pp. 271–285. 49. Zakovorotny V.L., Gvindzhiliya V.E. Evolution of the dynamic cutting system with irreversible energy transformation in the machining zone. Russian Engineering Research , 2019, vol. 39, no. 5, pp. 423–430. DOI: 10.3103/S1068798X19050204. 50. Zakovorotny V.L., Gvindzhiliya V.E. Bifurkatsii prityagivayushchikh mnozhestv deformatsionnykh smeshchenii rezhushchego instrumenta v khode evolyutsii svoistv protsessa obrabotki [Bifurcations of attracting sets of cutting tool deformation displacements at the evolution of treatment process properties]. Izvestiya vysshih uchebnyh zavedenij. Prikladnaya nelinejnaya dinamika = Izvestiya VUZ. Applied Nonlinear Dynamics , 2018, vol. 26, no. 5, pp. 20–38. DOI: 10.18500/0869-6632-2018-26-5-20-38. 51. Myshkis A.D. Matematika dlya vtuzov: spetsial’nye kursy [Mathematics. Special course]. Moscow, Nauka Publ., 1971. 640 p. Conflicts of Interest The authors declare no conflict of interest. 2019 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).
Made with FlippingBook
RkJQdWJsaXNoZXIy MTk0ODM1