Obrabotka Metallov 2021 Vol. 23 No. 1
OBRABOTKAMETALLOV Vol. 23 No. 1 2021 44 TECHNOLOGY the basis of change of electromagnetic properties of hard alloys]. Kontrol’. Diagnostika = Testing. Diagnostics , 2018, no. 12, pp. 54–57. 20. Artamonov E.V., Tveryakov A.M., Shtin A.S. Opredelenie temperatury maksimal’noi rabotosposobnosti instrumental’nykh tverdykh splavov [Determination of temperature of maximum working capacity of tool hard alloys]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2018, vol. 20, no. 3, pp. 47–57. DOI: 10.17212/1994-6309-2018-20.3-47-57. 21. Vereshchaka A.S. Rabotosposobnost’ rezhushchego instrumenta s iznosostoikimi pokrytiyami [Operability of cutting tool with wear-resistant coatings]. Moscow, Mashinostroenie Publ., 1993. 336 p. ISBN 5-217-01482-2. 22. Artamonov E.V., TveryakovA.M., ShtinA.S. Razrabotka elementov ustanovki dlya opredeleniya temperatury maksimal’noi rabotosposobnosti rezhushchikh elementov iz tverdykh splavov [Development of installation elements for determination of temperature of maximum operability of cutting elements from hard alloys]. Transport i mashinostroenie Zapadnoi Sibiri = Transport and Mechanical Engineering of West Siberia , 2018, no. 1, pp. 31–38. 23. Srithar A., Palanikumar K., Durgaprasad B. Experimental investigation and surface roughness analysis on hard turning of AISI D2 steel using coated Carbide insert. Procedia Engineering , 2014, vol. 97, pp. 72–77. DOI: 10.1016/j.proeng.2014.12.226. Con fl icts of Interest The authors declare no con fl ict of interest. 2021 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/ ).
Made with FlippingBook
RkJQdWJsaXNoZXIy MTk0ODM1