Obrabotka Metallov 2021 Vol. 23 No. 3

OBRABOTKAMETALLOV Vol. 23 No. 3 2021 96 EQUIPMENT. INSTRUMENTS References 1. Haken H. Information and self-organization: a macroscopic approach to complex systems. Amsterdam, Elsevier, 2006. 258 p. ISBN 978-3-540-33021-9. DOI: 10.1007/3-540-33023-2. Synergetic approach to improve the ef fi ciency of machining process control on metal-cutting machines Vilor Zakovorotny a , Valery Gvindjiliya b, * Don State Technical University, 1 Gagarin square, Rostov-on-Don, 344000, Russian Federation a https://orcid.org/0000-0003-2187-9897, vzakovorotny@dstu.edu.ru , b https://orcid.org/0000-0003-1066-4604, sinedden@yandex.ru Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2021 vol. 23 no. 3 pp. 84–99 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2021-23.3-84-99 Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov ARTICLE INFO Article history : Received: 29 June 2021 Revised: 17 July 2021 Accepted: 30 July 2021 Available online: 15 September 2021 Keywords : Processing ef fi ciency Self-organization and evolution Synergetics of reconciling external and internal dynamics Funding This study was performed with fi nan- cial support of RFBR grants: “Devel- opment of the theory of analysis and synthesis of controlled self-organiza- tion in a dynamic cutting system during processing on the example of manu- facturing parts on lathes”, No. 19-08- 00022; “Development of methods for analysis and synthesis of a dynamic cutting system based on the criterion of minimizing the reduced manufacturing costs”, No. 20-38-90074. Acknowledgements Research were conducted at core facil- ity “Structure, mechanical and physi- cal properties of materials”. ABSTRACT Introduction. The ef fi ciency of processing on metal-cutting machines is evaluated by the reduced cost of producing a batch of parts while ensuring the required quality. In modern production, parts are usually made on CNC machines. Today the CNC program and the trajectories of the machine tool actuators match each other with high accuracy, which, however, does not yet guarantee quality and ef fi ciency of production. The de fi nition of the CNC program is based on the knowledge base of rational modes, tools, coolant and etc. during processing. This base re fl ects some averaging over the set of machines, tools and processing conditions, and does not take into account changes in the properties of the dynamic system in the process of cutting. Subject. The paper deals with the synergistic matching of external control (CNC programs) and cutting dynamics (internal control). The internal control factors can be set a priori, as well as determined as a result of the in fl uence of irreversible energy transformations in the cutting zone. The purpose of the work is to determine the law of controlling the trajectories of the machine’s executive elements in such a way that, with changing properties of the dynamic cutting system, the required surface quality of the part and minimizing the intensity of tool wear are ensured during the processing of the part. Method and methodology. Mathematical simulation of the controlled dynamic system, which properties change due to the a priori set laws of variation of subsystem parameters, as well as changes in the cutting properties conditioned by the power of irreversible energy transformation is presented. Consideration of the power of irreversible energy transformations is necessary for predicting back-edge wear, changes in dynamic coupling parameters, and evolutionary restructuring of cutting dynamics. Results and Discussion. The regularity of matching the CNC program with the changing properties of the cutting process, which allows increasing the processing ef fi ciency while ensuring the required quality of parts, is disclosed. A number of properties of the dynamic cutting system caused by changing trajectory of the longitudinal feed rate of the tool during processing of the shaft, the stiffness change of which is given, are revealed and analyzed. For citation: Zakovorotny V.L., Gvindjiliya V.E. Synergetic approach to improve the ef fi ciency of machining process control on metal- cutting machines. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2021, vol. 23, no. 3, pp. 84–99. DOI: 10.17212/1994-6309-2021-23.3-84-99. (In Russian). ______ * Corresponding author Gvindjiliya Valery E. , Post-graduate Student Don State Technical University, 1 Gagarin square, 344000, Rostov-on-Don, Russian Federation Tel.: +7 (918) 583-23-33, e-mail: sinedden@yandex.ru