OBRABOTKAMETALLOV Vol. 23 No. 4 2021 90 EQUIPMENT. INSTRUMENTS References 1. Buryta D., Sowerby R., Yellowley I. Stress distributions on the rake face during orthogonal machining. International Journal of Machine Tools and Manufacture , 1994, vol. 34, iss. 5, pp. 721 ‒ 739. DOI: 10.1016/08906955(94)90054-X. 2. Laakso S.V.A., Bushlya V., Ståhl J.-E. The correct way of splitting tools – Optimization of instrument design for measuring contact stress distribution. Procedia Manufacturing , 2018, vol. 25, pp. 97 ‒ 102. DOI: 10.1016/j. promfg.2018.06.062. 3. Grédiac M., Sur F., Blaysat B. The grid method for in-plane displacement and strain measurement: a review and analysis. Strain , 2016, vol. 52, iss. 3, pp. 205–243. DOI: 10.1111/str.12182. Study of the stress-strain and temperaturefields in cutting tools using laser interferometry Igor Efimovich a,* , Ivan Zolotukhin b Tyumen Industrial University, 38 Volodarskogo, Tyumen, 625000, Russian Federation a https://orcid.org/0000-0002-9060-4988, egor_kosin@mail.ru, b https://orcid.org/0000-0002-1517-9117, zolotuhinis@tyuiu.ru Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2021 vol. 23 no. 4 pp. 79–92 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2021-23.4-79-92 Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov ARTICLE INFO Article history : Received: 13 September 2021 Revised: 28 September 2021 Accepted: 09 November 2021 Available online: 15 December 2021 Keywords : Metal cutting Metal cutting tool Strain measurement Laser interferometry High-speed video recording Stress-strain state Stress distribution Temperature distribution Temperaturefield Boundary condition Numerical analysis ABSTRACT Introduction . The efficiency of the metalworking processes highly depends on the performance of the implemented cutting tools that can be increased by studying its stress-strain state and temperature fields. Existing stress analysis methods either have a low accuracy or are inapplicable for research during the operation of the tools made of materials with high mechanical properties. In addition, the study of temperaturefields using known methods is difficult due to the small size of the cutting zone, high temperatures, and a heavy temperature gradient appearing during metal cutting. The purpose of this study is to develop new experimental methods for measuring the stressstrain and temperaturefields in the cutting tool during its operation using laser interferometry. The methods include: obtaining interference fringe patterns using an interferometer with the original design, obtaining the tool deformation field during the cutting process by recording the changes in interference fringe patterns using a high-speed camera, processing fringe patterns with the separation of deformations caused by heating and cutting forces, and calculating temperature fields and stress distributions using mechanical properties and the coefficient of thermal expansion of the tool material. The advantages of the developed methods include: applicability under real operating conditions of the cutting tool, ability to study the non-stationary stress-strain state and temperatures during an operation, and achievement of a high spatial resolution and a small field of view for the investigated surface. Results and Discussion. The experimental study confirmed the efficiency of the methods. The results of the study included the fields of stresses and temperatures obtained during the orthogonal cutting of heat-resistant steel with a tool made of cemented tungsten carbideWC-8Co . The developed methods can be used to study the cutting tool efficiency at close to real conditions and in obtaining boundary conditions for the study stress-strain state of a workpiece material near the cutting zone. For citation: Efimovich I.A., Zolotukhin I.S. Study of the stress-strain and temperature fields in cutting tools using laser interferometry. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science , 2021, vol. 23, no. 4, pp. 79–92. DOI: 10.17212/1994-6309-2021-23.4-79-92. (In Russian). ______ * Corresponding author Efimovich Igor A. , Ph.D. (Engineering), Associate Professor Tyumen Industrial University 38 Volodarskogo, 625000, Tyumen, Russian Federation Tel.: +7 (3452) 50-49-15, e-mail: egor_kosin@mail.ru
RkJQdWJsaXNoZXIy MTk0ODM1