OBRABOTKAMETALLOV Vol. 24 No. 2 2022 49 TECHNOLOGY 20. Kargin V.R., Deryabin A.Yu. O konechno-elementnom analize napryazhenno-deformirovannogo sostoyaniya pri pressovanii krupnogabaritnykh prutkov s malymi vytyazhkami [On a fi nite element analysis of the stress-strain state in the case of large-size bar extruding with low extrusion ratios]. Tekhnologiya legkikh splavov = Technology of light alloys, 2016, no. 3, pp. 62–68. 21. Kargin V.R., DeryabinA.Yu. Modelirovanie temperaturnogo polya pri pressovanii krupnogabaritnykh prutkov iz trudnodeformiruemogo alyuminievogo splava ENAW2014 s ispol’zovaniem programmy Deform-2D [Simulation of a temperature fi eld with the use of Deform-2D sowtware for extrusion of large-size diffi cult-to-Deform ENAW2014 aluminium alloy bars]. Tekhnologiya legkikh splavov = Technology of light alloys, 2016, no. 4, pp. 61–67. 22. Bauser M., Sauer G., Siegert K., eds. Extrusion. ASM International, 2006. 592 p. (Russ. ed.: Bauzer M., Zauer G., Zigert K. Pressovanie. Moscow, Alyusil MViT Publ., 2009. 922 p.). 23. Perlin I.L., Raitbarg L.Kh. Teoriya pressovaniya metallov [Theory of metal extrusion]. Moscow, Metallurgiya Publ., 1975. 447 p. 24. Fan X., Suo T., Sun Q., Wang T. Dynamic mechanical behavior of 6061 al alloy at elevated temperatures and different strain rates. Acta Mechanica Solida Sinica, 2013, vol. 26, no. 2, pp. 111–120. DOI: 10.1016/S08949166(13)60011-7. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1