OBRABOTKAMETALLOV Vol. 24 No. 2 2022 90 MATERIAL SCIENCE 20. Kwok D.Y., NeumannA.W. Contact angle measurement and contact angle interpretation. Advances in Colloid and Interface Science, 1999, vol. 81, iss. 3, pp. 167–249. DOI: 10.1016/S0001-8686(98)00087-6. 21. Jamnaparaa N.I., Frangini S., Alphonsa J., Chauhan N.L., Mukherjee S. Comparative analysis of insulating properties of plasma and thermally grown alumina fi lms on electrospark aluminide coated 9Cr steels. Surface and Coatings Technology, 2015, vol. 266, pp. 146–150. DOI: 10.1016/j.surfcoat.2015.02.028. 22. Khimukhin S.N., Eremina K.P., Nikolenko S.V. Obtaining of coatings from Ni-Al by electro spark deposition and surface smoothing by ultrasonic plastic deformation. Materials Science Forum. Trans Tech Publications, 2021, vol. 1037, pp. 473–478. DOI: 10.4028/www.scientifi c.net/MSF.1037.473. 23. Nikolenko S.V., Syui N.A. Investigation of coatings produced by the electrospark machining method of steel 45 with electrodes based on carbides of tungsten and titanium. Protection of Metals and Physical Chemistry of Surfaces, 2017, vol. 53, iss. 5, pp. 889–894. DOI: 10.1134/S207020511705015X. 24. Burkov А.А., Kulik М.А., Krutikova V.O. Characteristics of Ti–Si coatings on Ti6Al4V alloy subjected to electrospark granules deposition. Tsvetnye metally, 2019, no. 4, pp. 54–59. DOI: 10.17580/tsm.2019.04.07. (In Russian). 25. XieY.-j., Wang D., Wang M.-s., YeW. Evaluation of three kinds of MCrAlYcoatings produced by electrospark deposition. Transactions of Nonferrous Metals Society of China, 2016, vol. 26, iss. 6, pp. 1647–1654. DOI: 10.1016/ S1003-6326(16)64274-7. 26. Ma J., Wen N., Wang R., Wang J., Zhang X. Li J., Chen Y. Effect of mullite fi lm layers on the hightemperature oxidation resistance of AISI 304 stainless steel. Coatings, 2021, vol. 11, iss. 8, p. 880. DOI: 10.3390/ coatings11080880. 27. Riffard F., Joannet E., Buscail H., Rolland R., Perrier S. Benefi cial effect of a pre-ceramic polymer coating on the protection at 900 °C of a commercial AISI 304 stainless steel. Oxidation of Metals, 2017, vol. 88, iss. 1, pp. 211–220. DOI: 10.1007/s11085-016-9705-1. 28. Guangxiong C., Zhongrong Z., Kapsa P., Vincent L. Effect of surface topography on formation of squeal under reciprocating sliding. Wear, 2002, vol. 253, iss. 3–4, pp. 411–423. DOI: 10.1016/S0043-1648(02)00161-8. Confl icts of Interest The authors declare no confl ict of interest. 2022 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
RkJQdWJsaXNoZXIy MTk0ODM1