OBRABOTKAMETALLOV Vol. 24 No. 4 2022 177 MATERIAL SCIENCE References 1. Bagesh B., Rahul K., Anil K.S. Effect on the mechanical properties of gray cast iron with variation of copper and molybdenum as alloying elements. International Journal of Engineering Research and Technology, 2014, vol. 3 (5), pp. 81–84. 2. Sujith B., Mukkollu S.R., Harish B.B., Leman Z. Effect on the mechanical properties of grey cast iron with variation of molybdenum and as – cast alloying elements. Universal Journal of Mechanical Engineering, 2020. vol. 8 (6), pp. 298–304. DOI: 10.13189/ujme.2020.080602. The effect of complex modifi cation on the structure and properties of gray cast iron for tribotechnical application Denis Gabets 1, a, Andrey Markov 1, b, Mikhail Guryev 1, c, Evgeny Pismenny 2, d, Alina Nasyrova 3, e, * 1 I.I. Polzunov Altai State Technical University, 46 Lenina avenue, Barnaul, Altai region, 656038, Russian Federation 2 Railway Research Institute of JSC Russian Railways, 10, 3rd Mytishchinskaya st., Moscow, 129851, Russian Federation 3 Novosibirsk State Technical University, 20 Prospekt K. Marksa, Novosibirsk, 630073, Russian Federation a https://orcid.org/0000-0003-0304-4407, gabets22@mail.ru, b https://orcid.org/0000-0002-3101-9711, andmarkov@inbox.ru, c https://orcid.org/0000-0002-9191-1787, gurievma@mail.ru, d https://orcid.org/0000-0002-7454-0830, pysmennyi.eug@gmail.com, e https://orcid.org/0000-0003-2551-3657, nasyrova.alina98@mail.ru Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2022 vol. 24 no. 4 pp. 165–180 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2022-24.4-165-180 ART I CLE I NFO Article history: Received: 15 September 2022 Revised: 29 September 2022 Accepted: 17 October 2022 Available online: 15 December 2022 Keywords: Alloying of cast iron Modifi cation Wear resistance Impact bend Wear resistant cast iron Graphite inclusions Acknowledgements Research were partially conducted at core facility “Structure, mechanical and physical properties of materials”. ABSTRACT Introduction. An approach based on the complex modifi cation of cast irons makes it possible to improve its mechanical properties by changing the structure of the metal matrix, as well as the shape of graphite and its distribution. The aim of this work is to study the infl uence of alloying elements on the structure and mechanical properties of gray cast irons obtained for operation under friction wear conditions. Research methods. The paper describes the process of obtaining complex modifi ed gray cast irons. Fractographic investigation of dynamically destroyed samples is carried out. Structure’s features of SCh35, ChMN-35M and SChKM-45 gray cast irons are studied. Tribological testing under sliding friction conditions is carried out. Results and its discussion. It is established that the complex modifi cation of SCh35 gray cast iron with molybdenum, nickel and vanadium makes it possible to increase its hardness to 295 HB and tensile strength to 470-505 MPa. Alloying with nickel (0.4-0.7 wt.%), molybdenum (0.4-0.7 wt.%) and vanadium (0.2-0.4 wt.%) leads to a decrease in the interlamellar distance of perlite by 2 times, as well as to the metal matrix grain refi ning. The length of graphite lamellas of modifi ed cast irons is reduced by 3-5 times. An additional effect on the tensile strength of cast iron is due to the alloying of ferrite with molybdenum and vanadium, which is fallen out along the boundaries of graphite inclusions. Alloying of ferrite with molybdenum and vanadium increases the level of its microhardness by 1.4 times in comparison with the α-phase of SCh35 serial cast iron. The results of tribotechnical tests of the designed materials are presented. Conclusions. It is established that the wear of specimens made of SChKM-45 cast iron is approximately 20-30% lower compared to cast iron SCh35 cast iron and 10-15% lower compared to ChMN-35M cast iron. Fractographic studies show that complex alloying with molybdenum, vanadium and nickel, contributing to the refi ning of pearlite colonies, leads to a decrease of the size of the cleavage facets. For citation: Gabets D.A., Markov A.M., Guryev M.A., Pismenny E.A., Nasyrova A.K. The effect of complex modifi cation on the structure and properties of gray cast iron for tribotechnical application. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2022, vol. 24, no. 4, pp. 165–180. DOI: 10.17212/1994-6309-2022-24.4-165-180. (In Russian). ______ * Corresponding author Alina Nasyrova K., Junior researcher Novosibirsk State Technical University, 20 Prospekt K. Marksa, 630073, Novosibirsk, Russian Federation Tel.: +79059376536, e-mail: nasyrova.alina98@mail.ru
RkJQdWJsaXNoZXIy MTk0ODM1