Actual Problems in Machine Building. Vol. 11. N 3-4. 2024 Innovative Technologies in Mechanical Engineering ____________________________________________________________________ 30 QUALITY CONTROL OF RUBBER PRODUCTS Gartfelder V.A., Ph.D. (Engineering), Associate Professor, e-mail: harvik48@list.ru Sekletina L.S., Senior Lecturer, e-mail: larsek@list.ru Borisov M.A., Ph.D. (Engineering), Associate Professor, e-mail: borisovmgou@mail.ru I.N. Ulianov Chuvash State University, 15 Moskovsky Prospekt, Cheboksary, 428015, Russian Federation Abstract In modern technology, products made from elastic and combined materials are widely used. Control of size, geometry and quality during the production of such products is associated with known difficulties. This is due to the physical and mechanical properties of the controlled products. The elasticity and pliability of elastic materials requires different testing methods and types of testing equipment than traditional methods for testing solid materials. Pliable materials do not allow accurate recording of linear dimensions when measured with instruments with rigid contact surfaces. It is necessary to use non-contact measurement methods, such as optical ones. New measuring and automated sorting equipment allows us to intensify control operations, increase the reliability of measurement results, and facilitate the process of control and sorting of products. The paper discusses examples of control of mechanical rubber goods (MRG). The positive effect of using new equipment, implementing new technologies and measuring instruments, as well as automating operations is shown. Keywords automation, rubber products, dimensions, measurements, control, quality, research.
RkJQdWJsaXNoZXIy MTk0ODM1