Obrabotka Metallov 2024 Vol. 26 No. 2

OBRABOTKAMETALLOV Vol. 26 No. 2 2024 20 TECHNOLOGY Investigations on ultrasonic vibration-assisted friction stir welded AA7075 joints: Mechanical properties and fracture analysis Vaibhav Gaikwad a, *, Satish Chinchanikar b Vishwakarma Institute of Information Technology, Survey No. 3/4, Kondhwa (Budruk), Pune – 411048, Maharashtra, India a https://orcid.org/0000-0002-3818-1893, vaibhav.219p0007@viit.ac.in; b https://orcid.org/0000-0002-4175-3098, satish.chinchanikar@viit.ac.in Obrabotka metallov - Metal Working and Material Science Journal homepage: http://journals.nstu.ru/obrabotka_metallov Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2024 vol. 26 no. 2 pp. 6–22 ISSN: 1994-6309 (print) / 2541-819X (online) DOI: 10.17212/1994-6309-2024-26.2-6-22 ART I CLE I NFO Article history: Received: 06 January 2024 Revised: 09 February 2024 Accepted: 20 March 2024 Available online: 15 June 2024 Keywords: Friction stir welding Shot peening Fracture analysis Ultrasonic vibrations AA7075 ABSTRACT Introduction. Joint effi ciency and strength, particularly in aluminum alloys, are crucial in aerospace, defense, and industrial applications. Post-welding treatments like shot peening and laser shock peening signifi cantly improve joint effi ciency and strength, enhancing fatigue life, grain structure, and tensile strength. The purpose of the work. The literature reviewed shows that the ultrasonic vibration-assisted friction stir welding (UVaFSW) and post-weld treatment improved the mechanical properties and material fl ow. However, limited studies have been observed on the UVaFSW joints of AA7075-T651, considering the consequence of welding speed, tool rotation, and post-weld shot peeing treatment. The methods of investigation. The study investigates the ultrasonic vibration-assisted friction stir welded (UVaFSWed) AA7075-T651 joint’s tensile strength, microhardness, microstructure, and fracture behavior, considering the impact of tool rotation, welding speed, and post-weld shot peening treatment. Results andDiscussion. The post-weld treated shot-peened UVaFSWed joints demonstrated the maximum tensile strength of 373.43 MPa, the microhardness of 161 HV, and the lowest surface roughness of 15.16 μm at 40 mm/min welding speed when compared to the friction stir-welded (FSWed) joints. These results indicate that shot peening improved the mechanical properties and surface quality of the UVaFSWed joints. The high tensile strength and low surface roughness make these joints suitable for applications requiring strength and aesthetics. The fracture for the shot peened UVaFSWed joints mainly occurred in the heat-aff ected zone (HAZ) during the tensile test. It could be attributed to the higher temperature experienced during welding, which resulted in grain growth and decreased material strength in the HAZ. The shot-peened UVaFSWed joint has a more uniform grain distribution than the FSWed one, which contributed to the joint’s higher tensile strength. The fractured surface of the shot peened UVaFSWed joints showed larger, equiaxed, and shallow dimples, resulting in higher ultimate tensile strength (UTS) and microhardness compared to the conventional FSWed joints. The mechanical properties and microstructure observed in the welding zones of shot peened UVaFSWed joints are superior to those of conventional FSW joints. However, further investigation is required to determine the specifi c factors contributing to this localized failure at HAZ, considering the eff ects of shot peening parameters. This study also suggests the potential for optimizing shot peened UVaFSWed joints of AA7075-T651. For citation: Gaikwad V., Chinchanikar S. Investigations on ultrasonic vibration-assisted friction stir welded AA7075 joints: Mechanical properties and fracture analysis. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 2, pp. 6–22. DOI: 10.17212/1994-6309-2024-26.2-6-22. (In Russian). ______ * Corresponding author Gaikwad Vaibhav, Ph.D. (Engineering) Vishwakarma Institute of Information Technology, Survey No. 3/4, Kondhwa (Budruk), Pune – 411048, Maharashtra, India Tel.: 91-20269502401, e-mail: vaibhav.219p0007@viit.ac.in References 1. Cetkin E., Çelik Y.H., Temiz S. Microstructure and mechanical properties of AA7075/AA5182 jointed by FSW. Journal of Materials Processing Technology, 2019, vol. 268, pp. 107–116. DOI: 10.1016/j.jmatprotec.2019.01.005. 2. Chinchanikar S., Gaikwad V.S. State of the art in friction stir welding and ultrasonic vibration-assisted friction stir welding of similar/dissimilar aluminum alloys. Journal of Computational and Applied Research in Mechanical Engineering, 2021, vol. 11, pp. 67–100. DOI: 10.22061/JCARME.2021.7390.1983. 3. Arora A., De A., Debroy T. Toward optimum friction stir welding tool shoulder diameter. Scripta Materialia, 2011, vol. 64, pp. 9–12. DOI: 10.1016/j.scriptamat.2010.08.052.

RkJQdWJsaXNoZXIy MTk0ODM1