OBRABOTKAMETALLOV Vol. 27 No. 2 2025 172 EQUIPMENT. INSTRUMENTS 2. Patel H., Patil H. Tribological performance based machinability investigations of Al2O3-ZrO2 ceramic cutting tool in dry machining of Ti-6Al-4V alloy. Tribology International, 2022, vol. 176, p. 107776. DOI: 10.1016/j. triboint.2022.107776. 3. Perry C., Liu D., Ingel R.P. Phase characterization of partially stabilized zirconia by Raman spectroscopy. Journal of the American Ceramic Society, 1985, vol. 68 (8), pp. C-184–C-187. DOI: 10.1111/j.1151-2916.1985. tb10176.x. 4. Nettleship I., Stevens R. Tetragonal zirconia polycrystal (TZP) – A review. International Journal of High Technology Ceramics, 1987, vol. 3, pp. 1–32. DOI: 10.1016/0267-3762(87)90060-9. 5. ArinM., Goller G., Vleugels J., Vanmeensel K. Production and characterization of ZrO2 ceramics and composites to be used for hip prosthesis. Journal of Materials Science, 2008, vol. 43 (5), pp. 1599–1611. DOI: 10.1007/s10853007-2343-x. 6. Mayer T., Kieren-Ehses S., Kirsch B., Aurich J.C. Comparison of diff erent 3Y-TZP substrates for the manufacture of all-ceramic micro end mills with respect to the cutting edge radius and the tool wear. Manufacturing Letters, 2023, vol. 38, pp. 44–46. DOI: 10.1016/j.mfglet.2023.09.001. 7. Dyatlova Ya.G., Kovelenov N.Yu., Rumyantsev V.I., Ordanyan S.S. Novaya rezhushchaya keramika v sisteme Al2O3–ZrО2(Y2O3)–Ti(C,N) [New cut-ting Al2O3/ZrO2/TI(C,N) ceramics]. Metaloobrabotka = Metalworking, 2014, no. 1 (79), pp. 32–36. 8. Senthil Kumar A., Raja Durai A., Sornakumar T. Machinability of hardened steel using alumina based ceramic cutting tools. International Journal of Refractory Metals and Hard Materials, 2003, vol. 21 (3–4), pp. 109–117. DOI: 10.1016/S0263-4368(03)00004-0. 9. Basha M.M., Basha S.M., Singh B.K., Mandal N., Sankar M.R. A review on synthesis of zirconia toughened alumina (ZTA) for cutting tool applications. Materials Today: Proceedings, 2020, vol. 26, pt. 2, pp. 534–541. DOI: 10.1016/j.matpr.2019.12.134. 10. Smuk B., Szutkowska M., Walter J. Alumina ceramics with partially stabilized zirconia for cutting tools. Journal of Materials Processing Technology, 2003, vol. 133, pp. 195–198. DOI: 10.1016/S0924-0136(02)00232-7. 11. Liang X., Liu Z., Liu W., Li X. Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as clean manufacturing process. Journal of Cleaner Production, 2019, vol. 214, pp. 279–289. DOI: 10.1016/j.jclepro.2018.12.196. 12. Liu W., Wu H., Xu Y., Lin L., Li Y., Wu S. Cutting performance and wear mechanism of zirconia toughened alumina ceramic cutting tools formed by vat photopolymerization-based 3D printing. Ceramics International, 2023, vol. 49 (14), pt. A, pp. 23238–23247. DOI: 10.1016/j.ceramint.2023.04.153. 13. Thakur T., Heinen S., Ehrle B., Blugan G. Optimizing woodcutting with zirconia-toughened alumina: processing, performance, and industrial insights. Heliyon, 2025, vol. 11 (2), p. e41785. DOI: 10.1016/j.heliyon.2025. e41785. 14. Prajapati P.K., Bapanapalle C.O., Biswas P., Kumar Sadhu K., Ranjan Sahoo R., Mandal N. Cutting performance, failure mechanisms and tribological properties of MWCNT-reinforced ZTA-MgO ceramic inserts in high-speed machining of hardened AISI-4340 steel. Diamond & Related Materials, 2024, vol. 153, p. 112094. DOI: 10.1016/j.diamond.2025.112094. 15. Ghosh K., Goswami S., Kumar Prajapati P., Roy P., Mandal N. Pressure-less sintering of molybdenum-reinforced ceramic cutting inserts with improved tool life. International Journal of Refractory Metals and Hard Materials, 2024, vol. 120, p. 106619. DOI: 10.1016/j.ijrmhm.2024.106619. 16. Singh B.K., Goswami S., Ghosh K., Roy H., Mandal N. Performance evaluation of self lubricating CuO added ZTA ceramic inserts in dry turning application. International Journal of Refractory Metals and Hard Materials, 2021, vol. 98, p. 105551. DOI: 10.1016/j.ijrmhm.2021.105551. 17. Wang B., Liu Z. Infl uences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review. The International Journal of Advanced Manufacturing Technology, 2018, vol. 98 (5–8), pp. 1925–1975. DOI: 10.1007/s00170-018-2314-1. 18. Wang Z.G., Wong Y.S., Rahman M. High-speed milling of titanium alloys using binderless CBN tools. International Journal of Machine Tools and Manufacture, 2005, vol. 45, pp. 105–114. DOI: 10.1016/j.ijmachtools.2004.06.021. 19. Sun F.J., Qu S.G., Pan Y.X., Li X.Q., Li F.L. Eff ects of cutting parameters on dry machining Ti-6Al-4V alloy with ultra-hard tools. The International Journal of Advanced Manufacturing Technology, 2015, vol. 79 (1–4), pp. 351–360. DOI: 10.1007/s00170-014-6717-3.
RkJQdWJsaXNoZXIy MTk0ODM1