OBRABOTKAMETALLOV Vol. 27 No. 4 2025 146 TECHNOLOGY 2. Zhang K., Cheng G. Three-dimensional high resolution topology optimization considering additive manufacturing constraints. Additive Manufacturing, 2020, vol. 35, p. 101224. DOI: 10.1016/j.addma.2020.101224. 3. Lubimyi N.S., Chepchurov M., Polshin A.A., Gerasimov M.D., Chetverikov B.S., Chetverikova A., Tikhonov A.A., Maltsev A. Reducing the cost of 3D metal printing using selective laser melting (SLM) technology in the manufacture of a drill body by reinforcing thin-walled shell forms with metal-polymers. Journal of Manufacturing and Materials Processing, 2024, vol. 8 (2), p. 44. DOI: 10.3390/jmmp8020044. 4. Morillas A.V., Alonso J.M., Caballero A.B., Sisamón C.C., Ceruti A. Adaptive variable design algorithm for improving topology optimization in additive manufacturing guided design. Inventions, 2024, vol. 9 (70), p. 9040070. DOI: 10.3390/inventions9040070. 5. Sambo A.M., Younas M., Njuguna J. Insights into machining techniques for additively manufactured Ti6Al4V alloy: A comprehensive review. Applied Sciences, 2024, vol. 14 (22), p. 10340. DOI: 10.3390/app142210340. 6. Zhu J., Zhou H., Wang C., Zhou L., Yuan S., Zhang W. A review of topology optimization for additive manufacturing: Status and challenges. Chinese Journal of Aeronautics, 2021, vol. 65, pp. 91–110. DOI: 10.1016/j. cja.2020.09.020. 7. Lubimyi N., VoronenkoV., PolshinA., GerasimovM.,Antsiferov S., Öztürk O.K., Chetverikov B., TikhonovA., Ryazantsev V., Shumyacher V., Melentiev N. What is the economic feasibility of manufacturing a metal-metal- polymer composite part compared to other technologies? Australian Journal of Mechanical Engineering, 2022, vol. 22 (2), pp. 314–325. DOI: 10.1080/14484846.2022.2094533. 8. Malyshev V.F., D’yachenko S.V. Rezanie trudnoobrabatyvaemykh stalei [Cutting of hard-to-machine steels]. Moscow, Mashinostroenie Publ., 2010. 248 p. 9. Trent E.M., Wright P.K. Rezanie metallov [Metal cutting]. Moscow, Mashinostroenie Publ., 2001. 385 p. (In Russian). 10. Aurich J.C., Zimmermann M., Schindler S., Steinmann P. Eff ect of the cutting condition and the reinforcement phase on the thermal load of the workpiece when dry turning aluminum metal matrix composites. The International Journal of Advanced Manufacturing Technology, 2016, vol. 82, pp. 1317–1334. DOI: 10.1007/s00170015-7444-0. 11. Liu H., Wang C., Li T., Bo Q., Liu K., Wang Y. Fixturing technology and system for thin-walled parts machining: a review. Frontiers of Mechanical Engineering, 2023, vol. 17 (4), p. 55. DOI: 10.1007/s11465-0220711-5. 12. Park J.-K., Lee C.-M., Kim D.-H. Investigation on the thermal eff ects of WC-Co turning inserts deposited by additive manufacturing of titanium alloy powder. Metals, 2021, vol. 11 (11), p. 1705. DOI: 10.3390/met11111705. 13. Sultana M.N., Dhar N.R., Zaman P.B. A review on diff erent cooling/lubrication techniques in metal cutting. American Journal of Mechanics and Applications, 2019, vol. 7, pp. 71–87. DOI: 10.11648/j.ajma.20190704.11. 14. Schiffl er M., Maul T., Welzel F., Frank H., Cselle T., Lümkemann A. Machining technology and PVD coatings for milling thin structural parts of Inconel 718. SSRN Electronic Journal, 2020, vol. 7, pp. 55–63. DOI: 10.2139/ssrn.3724144. 15. Taufi k M., Jain P.K. A study of build edge profi le for prediction of surface roughness in fused deposition modeling. Journal of Manufacturing Science and Engineering, 2016, vol. 138 (6), p. 061002. DOI: 10.1115/1.4032193. 16. Wang D., Yang Y., Yi Z., Su X. Research on the fabricating quality optimization of the overhanging surface in SLM process. The International Journal of Advanced Manufacturing Technology, 2013, vol. 65, pp. 1471– 1484. DOI: 10.1007/s00170-012-4271-4. 17. Hoang V.Ch. Prakticheskie voprosy issledovaniya temperatury rezaniya pri tochenii [Practical research cutting of temperature in turning]. Izvestiya Tul’skogo gosudarstvennogo universiteta. Tekhnicheskie nauki = Izvestiya Tula State University. Technical Sciences, 2015, no. 7-1, pp. 78–84. 18. CJSC Metal-Polymer Materials LEO. Tekhnicheskie usloviya TU 2257-002-48460567-00. Metallopolimer «Ferro-khrom» [Technical conditions TU 2257-002-48460567-00. Metal-Polymer “Ferro-Chrom”]. Moscow, 2009. Available at: http://www.leopolimer.ru (accessed 10.11.2025). 19. Tselikov P.V., Kisel A.G. Issledovanie iznashivaniya rezhushchego instrumenta pri tochenii splava TN1 [Investigation of the dependence of the wear intensity of the cutting tool during turning of TN1 alloy]. Sistemy. Metody. Tekhnologii = Systems. Methods. Technologies, 2025, no. 2 (66), pp. 43–49. DOI: 10.18324/2077-54152025-2-43-49. 20. Bordachev E.V., Lapshin V.P. Matematicheskoe modelirovanie temperatury v zone kontakta instrumenta i izdeliya pri tokarnoi obrabotke metallov [Mathematical temperature simulation in tool-to-work contact zone during metal turning]. Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta = Vestnik of Don State Technical University, 2019, vol. 19, no. 2, pp. 130–137. DOI: 10.23947/1992-5980-2019-19-2-130-137.
RkJQdWJsaXNoZXIy MTk0ODM1