OBRABOTKAMETALLOV Vol. 27 No. 4 2025 286 MATERIAL SCIENCE 20. Belov N., Alabin A., Aleshchenko A., Mann V., Tsydenov K. Simultaneous increase of electrical conductivity and hardness of Al–1.5 wt.%Mn alloy by addition of 1.5 wt.% Cu and 0.5 wt.% Zr. Metals, 2019, vol. 9 (12), p. 1246. DOI: 10.3390/met9121246. 21. Belov N.A., Alabin A.N., Matveeva I.A. Optimization of phase composition of Al–Cu–Mn–Zr–Sc alloys for rolled products without requirement for solution treatment and quenching. Journal of Alloys and Compounds, 2014, vol. 583, pp. 206–213. DOI: 10.1016/j.jallcom.2013.08.202. 22. Malygin G.A. Prochnost’ i plastichnost’ nanokristallicheskikh materialov i nanorazmernykh kristallov [Strength and plasticity of nanocrystalline materials and nanosized crystals]. Uspekhi fi zicheskikh nauk = PhysicsUspekhi, 2011, vol. 181, no. 11, pp. 1129–1156. DOI: 10.3367/UFNr.0181.201111a.1129. (In Russian). 23. Petrova A.N., Klenov A.I., Brodova I.G., Rasposienko D.Yu., Pil’shchikov A.A., Orlova N.Yu. Vliyanie tekhnologicheskikh faktorov na strukturu i svoistva Al–Cu–Mg–Si-splava, poluchennogo selektivnym lazernym splavleniem [Infl uence of technological factors on the structure and properties of Al–Cu–Mg–Si alloy obtained by selective laser melting]. Fizika metallov i metallovedenie = Physics of Metals and Metallography, 2023, vol. 124, no. 10, pp. 961–970. DOI: 10.31857/S0015323023600922. 24. Mondal C., Mukhopadhyay A.K. On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in ascast and annealed 7055 aluminum alloy. Materials Science and Engineering: A, 2005, vol. 391 (1–2), pp. 367–376. DOI: 10.1016/j.msea.2004.09.013. 25. Chen Z., Li Z., Zhao K., Zhang H., Nagaumi H. Dendrite morphology evolution of Al6Mn phase in suction casting Al–Mn alloys. Materials, 2020, vol. 13 (10), p. 2388. DOI: 10.3390/ma13102388. 26. Kang H., Li X., Su Ya., Liu D., Guo J., Fu H. 3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidifi ed Al-3at.%Mn alloy. Intermetallics, 2020, vol. 23, pp. 32–38. DOI: 10.1016/j.intermet.2011.12.015. 27. Lombardi A., Mu W., Ravindran C., Dogan N., Barati M. Infl uence of Al2Cu morphology on the incipient melting characteristics in B206 Al alloy. Journal of Alloys and Compounds, 2018, vol. 747, pp. 131–139. DOI: 10.1016/j.jallcom.2018.02.329. Confl icts of Interest The authors declare no confl ict of interest. © 2025 The Authors. Published by Novosibirsk State Technical University. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0).
RkJQdWJsaXNoZXIy MTk0ODM1