ОБРАБОТКА МЕТАЛЛОВ Том 28 № 3 2026 308 МАТЕРИАЛОВЕДЕНИЕ 29. Höche D., Kaspar J., Schaaf P. 2 – Laser nitriding and carburization of materials // Laser surface engineering: processes and applications / ed. by J. Lawrence and D.G. Waugh. – Elsevier, 2015. – P. 33–58. – (Woodhead Publishing Series in Electronic and Optical Materials; no. 65). – DOI: 10.1016/B978-178242-074-3.00002-7. 30. Katsamas A.I., Haidemenopoulos G.N. Laserbeam carburizing of low-alloy steels // Surface and Coatings Technology. – 2001. – Vol. 139 (2–3). – P. 183– 191. – DOI: 10.1016/S0257-8972(00)01061-6. 31. Maharjan N., Zhou W., Wu N. Direct laser hardening of AISI 1020 steel under controlled gas atmosphere // Surface and Coatings Technology. – 2020. – Vol. 385. – P. 125399. – DOI: 10.1016/j. surfcoat.2020.125399. 32. The eff ect of laser energy density on the microstructure, residual stress and phase composition of H13 steel treated by laser surface melting / J. Zhang, M. Yu, Z. Li, Y. Liu, Q. Zhang, R. Jiang, S. Sun // Journal of Alloys and Compounds. – 2021. – Vol. 856. – P. 158168. – DOI: 10.1016/j.jallcom.2020.158168. 33. Laser surface hardening of carburized steels: a review of process parameters and application in gear manufacturing / J. Kluczyński, K. Jasik, J. Łuszczek, J. Pokropek // Materials. – 2025. – Vol. 18 (15). – P. 3623. – DOI: 10.3390/ma18153623. 34. Поздняков Е.П., Степанкин И.Н. Влияние длительности цементации на структуру и свойства конструкционных среднеуглеродистых сталей 40Х, 35ХГСА и 42CrMoS4 // Литье и металлургия. – 2024. – № 1. – С. 69–77. – DOI: 10.21122/1683-60652024-1-69-77. 35. Карлина Ю.И., Конюхов В.Ю., Опарина Т.А. Исследование процесса поверхностного обезуглероживания стали 20 после цементации и термической обработки // Обработка металлов (технология, оборудование, инструменты). – 2025. – Т. 27, № 3. – С. 122–136. – DOI: 10.17212/1994-6309-2025-27.3122-136. 36. Wong A. Modelling the stability and transformation kinetics of retained austenite in steels // Materials Science and Technology. – 2022. – Vol. 38 (11). – P. 676–688. – DOI: 10.1080/02670836. 2022.2063539. 37. The eff ect of morphology on the stability of retained austenite in a quenched and partitioned steel / X.C. Xiong, B. Chen, M.X. Huang, J.F. Wang, L. Wang // Scripta Materialia. – 2013. – Vol. 68 (5). – P. 321–324. – DOI: 10.1016/j.scriptamat.2012.11.003. 38. Advantages and shortcomings of retained austenite inbearing steels: a review/ C. Sidoroff ,M. Perez, P. Dierickx, D. Girodin // Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. – ASTM International, 2014. – P. 1–37. – DOI: 10.1520/STP158020140081. 39. Eff ect of retained austenite – Compressive residual stresses on rolling contact fatigue life of carburized AISI 8620 steel / Y. Shen, S.M. Moghadam, F. Sadeghi, K. Paulson, R.W. Trice // International Journal of Fatigue. – 2012. – Vol. 75. – P. 135–144. – DOI: 10.1016/j.ijfatigue.2015.02.017. 40. Evans M.H. An updated review: white etching cracks (WECs) and axial cracks in wind turbine gearbox bearings // Materials Science and Technology. – 2016. – Vol. 32 (11). – P. 1133–1169. – DOI: 10.1080/ 02670836.2015.1133022. 41. Kumar S., Singh S.B. Quantifi cation of retained austenite in low-carbon steels // Metallurgical and Materials Transactions A. – 2023. – Vol. 54 (11). – P. 4283–4294. – DOI: 10.1007/s11661-023-07162-1. 42. Evaluation of retained austenite in carburized bearing steel using magneto-inductive method / L.G. Ionescu, M.V. Pantawane, C. Tănase, R.V. Sichim, C.A. Dascălu, B. Ghiban // Crystals. – 2023. – Vol. 13 (8). – P. 1173. – DOI: 10.3390/cryst13081173. 43. Zhu Z., Liang Y. Prediction of residual stress of carburized steel based on machine learning // Applied Sciences. – 2020. – Vol. 10 (21). – P. 7759. – DOI: 10.3390/app10217759. 44. Experimental study on vacuum carburizing process for low-carbon alloy steel / S. Wei, G. Wang, X. Zhao, X. Zhang, Y. Rong // Journal of materials engineering and performance. – 2014. – Vol. 23 (2). – P. 545–550. – DOI: 10.1007/s11665-013-0762-1. 45. Eff ectiveness of machine-learning and deeplearning strategies for the classifi cation of heat treatments applied to low-carbon steels based on microstructural analysis / J. Muñoz-Rodenas, F. García-Sevilla, J. Coello-Sobrino, A. Martínez-Martínez, V. MiguelEguía // Applied Sciences. – 2023. – Vol. 13. – P. 3479. – DOI: 10.3390/app13063479. 46. Jovičević-Klug P., Podgornik B. Review on the eff ect of deep cryogenic treatment of metallic materials in automotive applications // Metals. – 2020. – Vol. 10 (4). – P. 434. – DOI: 10.3390/met10040434. 47. Eff ect of cryogenic treatment on microstructure, mechanical properties and distortion of carburized gear steels / Y. Yan, K. Liu, Z. Luo, M. Wang, X. Wang // Metals. – 2021. – Vol. 11. – P. 1940. – DOI: 10.3390/ met11121940. 48. Changes in microstructure of ledeburitic tool steel due to vacuum austenitizing and quenching, sub-zero treatments at – 140°C and tempering / J. Ďurica, J. Ptačinová, M. Dománková, L. Čaplovič, M. Čaplovičová, L. Hrušovská, V. Malovcová, P. Jurči // Vacuum. – 2019. – Vol. 170. – P. 108977. – DOI: 10.1016/j.vacuum.2019.10897.
RkJQdWJsaXNoZXIy MTk0ODM1