OBRABOTKAMETALLOV Vol. 28 No. 3 2026 68 TECHNOLOGY 3. Liu S., An L., Li H., Fu X., Ju B.-F., Chen Y.-L. Characterization and optimization of a locally boron-doped diamond tool for self-sensing of cutting temperature. Nanomanufacturing and Metrology, 2024, vol. 7 (1), p. 24. DOI: 10.1007/s41871-024-00243-8. 4. Díaz-Álvarez J., Tapetado A., Vázquez C., Miguélez H. Temperature measurement and numerical prediction in machining Inconel 718. Sensors, 2017, vol. 17 (7), p. 1531. DOI: 10.3390/s17071531. 5. Lakshmanan S., Pradeep Kumar M., Dhananchezian M. Optimization of turning parameter on surface roughness, cutting force and temperature through TOPSIS. Materials Today: Proceedings, 2023, vol. 72, pp. 2231– 2237. DOI: 10.1016/j.matpr.2022.09.209. 6. Kus A., Isik Y., Cakir M.C., Coşkun S., Özdemir K. Thermocouple and infrared sensor-based measurement of temperature distribution in metal cutting. Sensors, 2015, vol. 15 (1), pp. 1274–1291. DOI: 10.3390/s150101274. 7. Ramme J., Wegert R., Guski V., Schmauder S., Moehring H.-C. Development of a multi-sensor concept for real-time temperature measurement at the cutting insert of a single-lip deep hole drilling tool. Applied Sciences, 2022, vol. 12 (14), p. 7095. DOI: 10.3390/app12147095. 8. Li G., Lu W., Huang S., Zhang X., Ding S. Analysis and prediction of residual stresses based on cutting temperature and cutting force in rough turning of Ti–6Al–4V. Heliyon, 2022, vol. 8 (11), p. e11661. DOI: 10.1016/j. heliyon.2022.e11661. 9. LapshinV.P., Rusanovsky R.V., Turkin I.A. Evaluation of the infl uence of the reaction rate of the thermodynamic subsystem on the dynamics of the cutting process in metalworking. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2021, vol. 23, no. 2, pp. 17–30. DOI: 10.17212/1994-63092021-23.2-17-30. (In Russian). 10. Patil N.G., Saraf A.R., Kulkarni A.P Semi empirical modeling of cutting temperature and surface roughness in turning of engineering materials with TiAlN coated carbide tool. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2024, vol. 26, no. 1, pp. 155–174. DOI: 10.17212/1994-63092024-26.1-155-174. (In Russian). 11. Lyubimyi N.S., Chetverikov B.S., Klyuev S.V., Zagorodniy N.A., PolshinA.A., MaltsevA.K., Bytsenko M.V. Investigation of the thermal loading during turning of a metal–composite system as a function of cutting speed, feed rate, and depth when machining a thin-walled 2 mm metal shell. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2025, vol. 27, no. 4, pp. 131–147. DOI: 10.17212/1994-63092025-27.4-131-147. (In Russian). 12. Lapshin V.P., Khristoforova V.V., Nosachev S.V. Relationship of temperature and cutting force with tool wear and vibration in metal turning. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science, 2020, vol. 22, no. 3, pp. 44–58. DOI: 10.17212/1994-6309-2020-22.3-44-58. (In Russian). 13. Ślusarczyk Ł., Franczyk E. Estimation of temperature in the cutting area during orthogonal turning of grade 2 titanium. The International Journal of Advanced Manufacturing Technology, 2023, vol. 125, pp. 4485–4496. DOI: 10.1007/s00170-023-10877-5. 14. Ślusarczyk Ł. Experimental-analytical method for temperature determination in the cutting zone during orthogonal turning of GRADE 2 titanium alloy. Materials, 2021, vol. 14 (15), p. 4328. DOI: 10.3390/ma14154328. 15. Ranjbar S., Foorginejad A., Emam S.M., Ebadi M., Shiri K. Eff ects of cryogenic cooling on cutting temperature and surface roughness in turning of AA7075 aluminum alloy. Scientifi c Reports, 2026, vol. 16, p. 7914. DOI: 10.1038/s41598-026-39003-7. 16. Vornberger A., Picker T., Pötschke J., Herrmann M., Denkena B., Krödel A., Michaelis A. Infl uence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses. Materials, 2020, vol. 13 (20), p. 4571. DOI: 10.3390/ma13204571. 17. Bohdanov O., Derbaba V., Dubrovskyi S., Ruban V., Nazarenco N. Study of cutting temperature during turningof high-hard cast irons. Collection of Research Papers of the National Mining University, 2023, vol. 75, pp. 44–54. DOI: 10.33271/crpnmu/75.044. 18. Sandhu N., Singh R., Singh N. Analysis of tool wear and cutting temperature in WS2-assisted MQL turning of H13 steel. Discover Mechanical Engineering, 2025, vol. 4, p. 55. DOI: 10.1007/s44245-025-00136-0. 19. Dubovska R., Majerik J., Baska I., Jambor J. Investigation of cutting temperature during AlCu3MgMnPb aluminium alloy turning. Manufacturing Technology, 2015, vol. 15 (5), pp. 796–801. DOI: 10.21062/ujep/ x.2015/a/1213-2489/MT/15/5/796. 20. Kónya G., Takács J., Miskolczi I., Kovács Z.F. Investigation of the eff ects of machining parameters on cutting conditions during orthogonal turning of austenite stainless steel. Production Engineering Archives, 2024, vol. 30 (2), pp. 251–258. DOI: 10.30657/pea.2024.30.24.
RkJQdWJsaXNoZXIy MTk0ODM1