OBRABOTKAMETALLOV Vol. 28 No. 3 2026 358 MATERIAL SCIENCE References 1. Hu C., Jiang Y., Quan J., Zong X., Lu Y., Li Y., Chen S. The retarding growth mechanism of boride layers on AISI 316L stainless steel: A combined experimental and DFT study. Scripta Materialia, 2025, vol. 269, p. 116899. DOI: 10.1016/j.scriptamat.2025.116899. 2. Xu J., Yang Y., Han H., Lei J., Di R., Fang Y. Enhancement of wear resistance and corrosion resistance of austenitic stainless steel by graphene nanoplatelets and titanium powders. Ceramics International, 2025, vol. 51 (23), pp. 38152–38165. DOI: 10.1016/j.ceramint.2025.06.051. 3. Zhao G., Zhang Y., Zhao H., Li J., Li H., Ma L. Study on the process optimization and wear resistance of electron beam claddingAlCoCrFeNi coating on 253MAaustenitic stainless steel surface. Materials Characterization, 2023, vol. 205, p. 113341. DOI: 10.1016/j.matchar.2023.113341. 4. Veeramallu K., KrishnaA.G. Enhanced wear and corrosion performance of stainless steel 316Lwith addition of diff erent weight percentages of GNP. Composites Theory and Practice, 2024, vol. 24 (1), pp. 25–32. DOI: 10.62753/ ctp.2024.04.1.1. 5. Wu T., Yang H., Xu G., Zhen Y., Han F., Zhang Y., Liu Y., Ji C., Wang K. Achieving ultrahigh wear resistance via laser remelting-induced nano-lamellar structures in FeCrB alloy coatings. Surface and Coatings Technology, 2025, vol. 517, p. 132840. DOI: 10.1016/j.surfcoat.2025.132840. 6. Chen C., Lv B., Ma H., Sun D., Zhang F. Wear behavior and the corresponding work hardening characteristics of Hadfi eld steel. Tribology International, 2018, vol. 121, pp. 389–399. DOI: 10.1016/j.triboint.2018.01.044. 7. Röttger A., Weber S., Theisen W. Supersolidus liquid-phase sintering of ultrahigh-boron high-carbon steels for wear-protection applications. Materials Science and Engineering: A, 2011, vol. 528 (13–14), pp. 4631–4638. DOI: 10.1016/j.msea.2011.10.118. 8. Shi X., Jiang Y. Analysis of morphological, thermodynamic, and mechanical properties of typical hard phase Fe–5Cr–1.5B–0.45C alloy. Journal of Alloys and Compounds, 2020, vol. 816, p. 152681. DOI: 10.1016/j. jallcom.2019.152681. 9. Lentz J., Röttger A., Theisen W. Mechanism of the Fe3(B,C) and Fe23(C,B)6 solid-state transformation in the hypoeutectic region of the Fe-C-B system. Acta Materialia, 2016, vol. 119, pp. 80–91. DOI: 10.1016/j. actamat.2016.08.009. 10. Röttger A., Lentz J., Theisen W. Boron-alloyed Fe–Cr–C–B tool steels – Thermodynamic calculations and experimental validation. Materials & Design, 2015, vol. 88, pp. 420–429. DOI: 10.1016/j.matdes.2015.08.157. 11. Berns H., Fischer A. Abrasive wear resistance and microstructure of Fe-Cr-C-B hard surfacing weld deposits. Wear, 1986, vol. 112 (2), pp. 163–180. DOI: 10.1016/0043-1648(86)90238-3. 12. Lentz J., Röttger A., Theisen W. Hardness and modulus of Fe2B, Fe3(C,B), and Fe23(C,B)6 borides and carboborides in the Fe-C-B system. Materials Characterization, 2018, vol. 135, pp. 192–202. DOI: 10.1016/j. matchar.2017.11.012. 13. Yi Y., Xing J., Lu Y., Fu H., Wan M., Yu L., Zheng Q., Ya C. Investigations on microstructure, mechanical properties and abrasion resistance of 4wt%Cr-2wt%Mn-2wt%Cu-Fe-B alloy. Materials Characterization, 2018, vol. 137, pp. 222–230. DOI: 10.1016/j.matchar.2018.01.038. 14. Acosta P., Lara A., Valenzuela R. Superplastic behavior of thermomechanically processed Fe-0.8B-1.3C1.6Cr (wt%) alloy. Materials Letters, 1996, vol. 26 (1–2), pp. 97–101. DOI: 10.1016/0167-577X(95)00193-X. 15. Jiang Z.Q., Feng X.L., Shi J.F. Infl uence of heat treatment on structures and mechanical properties of cast Fe-B-C alloy. Advanced Materials Research, 2008, vol. 33–37, pp. 459–462. DOI: 10.4028/www.scientifi c.net/ AMR.33-37.459. 16. Zhang H., Fu H., Jiang Y., Yu Z., Guo H., Lei Y., Zhou R., Cen Q. Eff ect of heat treatment on microstructure and property of Fe-Cr-B alloy. Materialwissenschaft und Werkstoff technik, 2012, vol. 43 (11), pp. 931–941. DOI: 10.1002/mawe.201200939. 17. Cui G., Yang Z., Wang W., Gao G. Tribological properties of Fe(Cr)-B alloys at high temperature. Journal of Central South University, 2019, vol. 26 (10), pp. 2643–2650. DOI: 10.1007/s11771-019-4201-9. 18. Cui G., Wei J., Wu G. Wear behavior of Fe-Cr-B alloys under dry sliding condition. Industrial Lubrication and Tribology, 2015, vol. 67 (4), pp. 336–343. DOI: 10.1108/ILT-07-2014-0065. 19. Malyutina Yu.N., Pukhova E.A., Dudareva A.A., Batyrov B.B., Lazurenko D.V., Bataev I.A. Ni-Cr-Ti and Ni-Cr-Ti-B coatings prepared by nonvacuum electron beam cladding: Eff ect of boron and chromium on the microstructure, hardness and high-temperature oxidation resistance. Materials Today Communications, 2025, vol. 43, p. 111730. DOI: 10.1016/j.mtcomm.2025.111730.
RkJQdWJsaXNoZXIy MTk0ODM1